Gilson Peristaltic Pumps MINIPULS® 3
Gilson Peristaltic Pumps MINIPULS® 3

Gilson Logo

A peristaltic pump that delivers high resolution and precision speed and control for delivering smooth, low pulse flows without sample shearing or degradation.

Gilson’s MINIPULS® 3 is a peristaltic pump specifically designed to meet process laboratory liquid handling needs. The MINIPULS 3 peristaltic pump combines microprocessor speed control with a high-torque stepper motor. Chemical-resistant pump heads, equipped with 10 stainless steel rollers, set the performance standard in producing smooth, low-pulse flow and reproducible flow rates at higher pressures.

Download PDF:

  • Quickly Interchangeable Pump Heads:

– Standard flow rates (1, 2, 4, or 8 channels)—0.3 µL/min to 30 mL/min at a maximum pressure of 0.5 MPa. – High flow rates (2 or 4 channels)—1 mL/min to 220 mL/min at a maximum pressure of 0.3 MPa. – Each head accepts different tubing sizes, making the multipurpose pump head an economical choice

  • Keypad Functions: Start/Stop, Direction of Flow, Increase/Decrease Flow, Prime
  • Head Speeds: Adjustable from 0 to 48 rpm by increments of 0.01 rpm up to 9.99 rpm and by 0.1 rpm at above 10 rpm
  • Motor Speed Stability: Maximum of 0.5% for any variation of line voltage, torque, or temperature (from 0 to 40°C)
  • Compatibility: Easy to integrate into your existing system – control through the keypad or remotely through another device (by electrical contact or computer)
  • Compact Design: 15 cm x 17.5 cm x 18 cm (W x D x H); lightweight at 4 kg
Flow rate Standard model: 0.3 µL/min to 30 mL/min (72 psi/5 bar/0.5 MPa max)
High flow model: 1 mL/min to 220 mL/min (42 psi/3 bar/0.3 MPa max)
Peristaltic tubing diameter Standard model: 0.25 to 4 mm (i.d.)
High flow model: 2 to 8 mm (i.d.)
Head speed Continuous adjustment from 0 to 48 rpm by 0.01 rpm increments
Up to 9.99 rpm and by 0.1 increments above 10 rpm
Pump head Standard model: 1, 2, 4 or 8 channel heads with 10 stainless steel rollers per head
High flow model: 2 or 4 channel heads with 5 stainless steel rollers per head
Tubing materials PVC for most applications – Isoversinic® for chemical inertness – Silicone for biocompatibility – PharMed® for FDA and USP class 4

 

Operating Conditions
Motor speed stability 0.5% for any variation of line voltage – Torque or temperature
Line voltage 90V to 132V for 110 voltage selection: 180V to 264V for 220 voltage selection
Line frequency 47 to 63 Hz
Power consumption Full load 45 W at 220V – No load 35 W at 220V
Operating temperature 0-40° C No warm-up time required
Dimensions (w x h x d) 15 x 18 x 17.5 cm (5.0 x 7.1 x 6.9 in)
Weight 4 kg (9 lbs)
Input/Output options Contact closure: Two TTL-compatible inputs for control of start/stop and direction of flow
Voltage input: One 5V analog signal for variable control of motor speed
Serial: Gilson Serial Input/Output Channel (GSIOC) – RS-422A interface
Keypad functions Start – Stop – Direction of flow – Increase and decrease flow – Prime

 

 

 

 

Title:

Name*:

Company Name:

Lab/Department:

Contact Number:

Fax Number:

Email*:

Address:

Subject:

Comments/Message: